Heavy Wall Adhesive Lined Heat Shrinkable Tube SBRSW/

    Heavy Wall Adhesive Lined Heat Shrinkable Tube.

    Heavy wall heat shrinkable tuing provides maximum reliability for insulation and protecting cable joints and terminations.

    Features

  • Withstands severe mechanical requirements.
  • Rated for 600v,90℃ continuous use.
  • Optional thermoplastic adhesive liner for complete environmental protection and insulation.
  • Continuous Operation Temperature:-45 ºċ to 125ºċ.
  • Shrink Temperature:125ºċ.

Dimensions

Size As Supplied After Recovery Standard length (M/pc)
mm Internal Diameter(mm) Internal Diameter Out layer Wall Thickness Adhesive Layer Wall Thickness Total Wall Thickness
9/3 ≥9 ≤3 2.0±0.20 0.35±0.1 2.30±0.25 1.22
13/4 ≥16 ≤4 2.4±0.20 0.35±0.1 2.75±0.25 1.22
20/6 ≥19.1 ≤6 2.5±0.20 0.40±0.1 2.90±0.25 1.22
28/9 ≥25 ≤9 2.5±0.20 0.40±0.1 2.90±0.25 1.22
33/10.2 ≥33 ≤10.2 3.2±0.25 0.40±0.1 3.60±0.25 1.22
238.1/12 ≥38.1 ≤12 3.4±0.20 0.60±0.15 4.00±030 1.22
43.2/12.7 ≥43.2 ≤12 4.3±0.20 0.70±0.35 5.00±035 1.22
51/16 ≥51 ≤16 4.3±0.20 0.70±0.35 5.00±035 1.22
70/21 ≥70 ≤21 4.3±0.20 0.70±0.35 5.00±035 1.22
85/25 ≥85 ≤25 4.3±0.20 0.70±0.35 5.00±035 1.22
105/30 ≥105 ≤30 4.3±0.20 0.80±0.35 5.10±035 1.22
120/39 ≥120 ≤39 4.3±0.20 0.50±0.35 5.10±035 1.22
140/42 ≥140 ≤42 4.3±0.20 0.60±0.35 5.10±035 1.22

Technical Date:

Property Test Method Stantard
Tensile Strength(Mpa) ASTM D2671 ≥10.4
Elongation(%) ASTM D2671 ≥300
Density(g/) ASTM D792 1.2
Longitudinal change(%) UL 224 ≤±10
Elongation after aging(%) UL224 158?? X168hrs ≥200
Heat shock UL224 225?? X4hrs No cracking
Dielectric strength(kv/mm) IEC 243 ≥20
Volume resistivity(Ω.cm) IEC 93 ≥1014
Water absorption(%) ASTM-D570 ≤0.5

Hot Melting Adhesive Property

Property Test Method Stantard
Water absorption ASTM D570 ≤0.2%
Softening point ASTM E28

95℃

Peel strength(PE) ASTM D1000 120N/25mm
Peel strength(AL) ASTM D1000 80N/25mm